TorresVault Documentation

TorresVault Flash Array (SSD Pool)

This page documents the full SSD layout, serial numbers, physical placement, and ZFS vdev assignments for the all-flash array inside the PVE-NAS node.

This array uses 22 × Samsung PM863 1.92TB SSDs arranged as 11 mirrored vdevs.

📦 Drive Inventory – Master Table

ID	Serial Number	Model	Size	Port Mapping	Physical Location	VDEV	Role	Notes
—–	—————-	——–	——–	—————–	————————-	——–	——–	——–
D01	S1YKNX0H602526	PM863	1.92 TB		Tray 01 – Upper	Mirror 01	Data
D02	S1YKNXAGB51740	PM863	1.92 TB		Tray 01 – Upper	Mirror 01	Data	drive-scsi3
D03	S1YKNXAH301378	PM863	1.92 TB		Tray 02 – Upper	Mirror 02	Data	drive-scsi6
D04	S1YKNXAGB49810	PM863	1.92 TB		Tray 02 – Upper	Mirror 02	Data
D05	S1YKNX0H602529	PM863	1.92 TB		Tray 03 – Upper	Mirror 03	Data
D06	S1YKNXAGB55937	PM863	1.92 TB		Tray 03 – Upper	Mirror 03	Data	X
D07	bf9b	PM863	1.92 TB		Tray 04 – Upper	Mirror 04	Data
D08	5e8c	PM863	1.92 TB		Tray 04 – Upper	Mirror 04	Data
D09	S1YKNXAH301436	PM863	1.92 TB		Tray 05 – Upper	Mirror 05	Data	x
D10	S1YKNXAGB51503	PM863	1.92 TB		Tray 05 – Upper	Mirror 05	Data	x
D11	S1YKNXAGB52794	PM863	1.92 TB		Tray 06 – Lower	Mirror 06	Data	x
D12	S1YKNX0H602510	PM863	1.92 TB		Tray 06 – Lower	Mirror 06	Data	x
D13	2967	PM863	1.92 TB		Tray 07 – Lower	Mirror 07	Data	drive-scsi3
D14	4440	PM863	1.92 TB		Tray 07 – Lower	Mirror 07	Data	drive-scsi8
D15	2516	PM863	1.92 TB		Tray 08 – Lower	Mirror 08	Data
D16	1375	PM863	1.92 TB		Tray 08 – Lower	Mirror 08	Data
D17	9974	PM863	1.92 TB		Tray 09 – Rear	Mirror 09	Data
D18	2518	PM863	1.92 TB		Tray 09 – Rear	Mirror 09	Data
D19	1430	PM863	1.92 TB		Tray 10 – Rear	Mirror 10	Data
D20	5670	PM863	1.92 TB		Tray 10 – Rear	Mirror 10	Data
D21	2714	PM863	1.92 TB		Behind Motherboard	Mirror 11	Data
D22	4477	PM863	1.92 TB		Behind Motherboard	Mirror 11	Data

🧩 VDEV Layout Map

Each tray houses two drives which form a mirrored vdev.

Mirror 01 → D01 + D02
Mirror 02 → D03 + D04
Mirror 03 → D05 + D06
Mirror 04 → D07 + D08
Mirror 05 → D09 + D10
Mirror 06 → D11 + D12
Mirror 07 → D13 + D14
Mirror 08 → D15 + D16
Mirror 09 → D17 + D18
Mirror 10 → D19 + D20
Mirror 11 → D21 + D22

Total Usable Capacity: ~21 TB Flash Total Drives: 22 VDEV Count: 11 mirrored pairs

🗺 Physical Placement Diagram

This helps identify drives quickly without opening trays or following cables manually.

Front Drive Stack (Upper Section)

Tray 01 → D01, D02
Tray 02 → D03, D04
Tray 03 → D05, D06
Tray 04 → D07, D08
Tray 05 → D09, D10

Front Drive Stack (Lower Section)

Tray 06 → D11, D12
Tray 07 → D13, D14
Tray 08 → D15, D16

Rear / PSU Shroud / Inline Mount Areas

Tray 09 → D17, D18
Tray 10 → D19, D20

Behind Motherboard / Cable Channel

Inline → D21, D22

🔌 Port Mapping (To Fill In)

Document the exact SATA/SAS/HBA port numbers for future replacements.

Drive ID	Controller	Port Number	Notes
———-	————-	————–	——–
D01	SATA
D02	SATA
D03	SATA
D04	SATA
D05	HBA1	Port X
D06	HBA1	Port X
D07	HBA1	Port X
D08	HBA1	Port X
D09	HBA1	Port X
D10	HBA1	Port X
D11	HBA2	Port X
D12	HBA2	Port X
D13	HBA2	Port X
D14	HBA2	Port X
D15	HBA2	Port X
D16	HBA2	Port X
D17	HBA2	Port X
D18	HBA2	Port X
D19	SATA	Port X
D20	SATA	Port X
D21	SATA	Port X
D22	SATA	Port X

🧪 Burn-In Checklist (Optional but Recommended)

For each drive (D01–D22):

[ ] SMART extended test
[ ] Write/verify test
[ ] Check power-on hours
[ ] Check wear level
[ ] Confirm firmware
[ ] Confirm TrueNAS recognizes it
[ ] Assign to correct vdev
[ ] Update this page

📝 Replacement Procedure

1. Identify failing drive from TrueNAS alert 2. Locate drive in this table 3. Check physical tray for that ID 4. Power down host 5. Remove SSD from its tray / stack 6. Insert replacement drive and label it 7. Update wiki entry 8. Online replace the disk in TrueNAS 9. Verify resilver 10. Mark task completed

📚 Notes

*All SSDs are Samsung PM863 enterprise-grade SATA 1.92 TB drives salvaged from Nimble arrays.* *All vdevs are mirrors for maximum IOPS, redundancy, and resilver performance.*

Table of Contents